07-14-2014 04:42 AM - edited 03-16-2019 11:23 PM
Dears
i have a CUE installed on our CME Router and i configure it as Cisco Suggest and every thing went well i can login to GUI but still im facing problem to run the initalization wizard it give error:
Login to CUCME as an administartor failed. Check your CUCME Configuration
here is the configuration
CME:
ip dhcp excluded-address 10.1.22.1 10.1.22.10
ip dhcp excluded-address 10.1.23.1 10.1.23.10
ip dhcp excluded-address 10.1.23.118
ip dhcp excluded-address 10.1.22.250 10.1.22.254
!
ip dhcp pool VOICE
network 10.1.22.0 255.255.255.0
default-router 10.1.22.250
option 150 ip 10.1.22.250
!
ip dhcp pool DATA
network 10.1.23.0 255.255.255.0
default-router 10.1.23.250
dns-server 10.1.2.17 8.8.8.8
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
trunk group STC
!
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-3890567270
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3890567270
revocation-check none
rsakeypair TP-self-signed-3890567270
!
!
crypto pki certificate chain TP-self-signed-3890567270
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33383930 35363732 3730301E 170D3134 30373134 31303139
33325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 38393035
36373237 3030819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B475 5D6B07CD 275D35EF D28AD843 784796C1 5E0371CE 271009AE B7891CC2
253A26EB 86F99A4D DC9856CF CA395428 E4568FC2 513C00D7 CAC423F2 51CFBEE3
9249EBBB 810C3E1B 8473B117 E94047F7 F594C849 F7FE3138 EDA7D655 EBBD64CD
2F4E532F A9011269 4A389B4B 0125EBF0 46EECD3D CCE0A8A7 2D32D182 EBE29D1E
F3710203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 1494131A 5654E310 682C77BF 26D1DEEF 4BE76F46 CF301D06
03551D0E 04160414 94131A56 54E31068 2C77BF26 D1DEEF4B E76F46CF 300D0609
2A864886 F70D0101 05050003 8181003E 7DC8D63C 159DF642 3556EC7B 4E01738A
461973F7 6B17CB24 EC8A8B6D AF366D51 7EB9D4F4 70A7DB73 A1ED1B3A 1CA7E8AC
76B38037 9CE25670 B28AD2D9 98B2F6FF C3519824 8BCC6B58 0E9404E0 BDBA13C1
FC4B6BDB D94244E6 BCC0262B DB60CFC2 8849A56E 1EFAC94F 6E34E183 DDCAC6AA
D5A73B43 2BC00977 8023AA5E C4B2B2
quit
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
sip
bind control source-interface GigabitEthernet0/0.22
bind media source-interface GigabitEthernet0/0.22
registrar server
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
codec preference 4 g729br8
!
voice class codec 3
codec preference 1 g711ulaw
codec preference 2 g711alaw
!
!
voice register global
mode cme
source-address 10.1.22.250 port 5060
max-dn 10
max-pool 10
authenticate register
authenticate realm aysar
tftp-path flash:
file text
create profile sync 1425649145506128
!
voice register dn 1
number 2211
name Aysar Mohamed
label Aysar Mohamed
!
voice register pool 1
registration-timer max 720 min 660
id mac A4C3.617E.0D58
session-transport tcp
type CiscoMobile-iOS
number 1 dn 1
username aysar password cola
!
voice logout-profile 1
pin 12345
user 2226 password 2226
number 2226 type feature-ring
speed-dial 1 90565285270 label "aysar"
!
voice user-profile 1
pin 12345
user 3000 password 2652
number 2299 type normal
speed-dial 1 90565285270 label "90565285270"
!
!
!
!
license udi pid CISCO2921/K9 sn FCZ163270CJ
hw-module ism 0
!
hw-module pvdm 0/0
!
!
!
!
redundancy
!
!
gw-accounting syslog
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.2
encapsulation dot1Q 2
ip address 10.1.1.250 255.255.255.0
!
interface GigabitEthernet0/0.22
encapsulation dot1Q 22
ip address 10.1.22.250 255.255.255.0
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.1.22.250
!
interface GigabitEthernet0/0.23
encapsulation dot1Q 23
ip address 10.1.23.250 255.255.255.0
!
interface GigabitEthernet0/0.180
encapsulation dot1Q 180
ip address 10.1.180.250 255.255.255.0
!
interface ISM0/0
description "Unity Express"
ip unnumbered GigabitEthernet0/0.22
ip virtual-reassembly in
service-module ip address 10.1.22.252 255.255.255.0
!Application: CUE Running on ISM
service-module ip default-gateway 10.1.22.250
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/2
description $ES_LAN$
no ip address
shutdown
duplex auto
speed auto
!
interface ISM0/1
description Internal switch interface connected to Internal Service Module
no ip address
!
interface Vlan1
no ip address
!
ip forward-protocol nd
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:GUI
!
ip route 0.0.0.0 0.0.0.0 10.1.23.100
ip route 10.1.0.0 255.255.0.0 10.1.180.3
ip route 10.1.1.0 255.255.255.0 10.1.1.3
ip route 10.1.22.252 255.255.255.255 ISM0/0
ip route 172.18.0.0 255.255.0.0 10.1.2.36
ip route 192.168.0.0 255.255.0.0 10.1.180.3
!
!
!
tftp-server flash:apps45.9-3-1ES26.sbn
tftp-server flash:cnu45.9-3-1ES26.sbn
tftp-server flash:cvm45sccp.9-3-1ES26.sbn
tftp-server flash:dsp45.9-3-1ES26.sbn
tftp-server flash:jar45sccp.9-3-1ES26.sbn
tftp-server flash:SCCP45.9-3-1SR4-1S.loads
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
!
control-plane
!
!
voice-port 0/0/0
trunk-group STC
connection plar opx 2207
impedance 900c
description "2613755 International"
!
voice-port 0/0/1
trunk-group STC
connection plar opx 2212
description "2613756 International"
!
voice-port 0/0/2
trunk-group STC
cable-detect
connection plar opx 2206
description "6651396 International"
!
voice-port 0/0/3
trunk-group STC
connection plar opx 2209
description "6638588 International"
!
voice-port 0/1/0
trunk-group STC
supervisory disconnect dualtone mid-call
no battery-reversal
cptone BE
timeouts call-disconnect 3
timeouts wait-release 3
timing sup-disconnect 300
connection plar opx 2215
impedance 900c
description "6639873 Land Line"
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
!
voice-port 0/1/1
trunk-group STC
connection plar opx 2221
description "6639752 Land Line"
!
voice-port 0/1/2
trunk-group STC
connection plar opx 2218
description "6638741 Mobile"
!
voice-port 0/1/3
trunk-group STC
connection plar opx 2205
description "6649781 Mobile"
!
!
!
mgcp profile default
!
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 3
associate application SCCP
shutdown
!
dspfarm profile 2 mtp
codec g711ulaw
maximum sessions hardware 2
associate application SCCP
shutdown
!
dial-peer cor custom
name INTE
name LOCAL
name ZERO
name INTERNATIONAL
!
!
dial-peer cor list INTE
member INTE
member LOCAL
!
dial-peer cor list ZERO
member INTE
member LOCAL
member ZERO
!
dial-peer cor list INTERNATIONAL
member INTE
member LOCAL
member ZERO
member INTERNATIONAL
!
dial-peer cor list LOCAL
member LOCAL
!
!
dial-peer voice 11 voip
description ****VOIP DP for CM ****
destination-pattern 1...
session target ipv4:10.1.1.11
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
codec g711alaw
no vad
!
dial-peer voice 12 voip
description ****VOIP DP for CM2 ****
preference 1
destination-pattern 1...
session target ipv4:10.1.1.14
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
codec g711alaw
no vad
!
dial-peer voice 13 voip
description ****VOIP DP for CM ****
destination-pattern 3...
session target ipv4:10.1.1.11
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
codec g711alaw
no vad
!
dial-peer voice 14 voip
description ****VOIP DP for CM2 ****
preference 1
destination-pattern 3...
session target ipv4:10.1.1.14
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
codec g711alaw
no vad
!
dial-peer voice 9901 pots
trunkgroup STC
shutdown
destination-pattern 9T
!
dial-peer voice 6135101 pots
trunkgroup STC
corlist outgoing ZERO
destination-pattern 905........
forward-digits 10
!
dial-peer voice 6135102 pots
trunkgroup STC
corlist outgoing ZERO
destination-pattern 901[1,2,3,4,6,7,8].......
forward-digits 10
!
dial-peer voice 6135103 pots
trunkgroup STC
corlist outgoing INTE
destination-pattern 990.
forward-digits 3
!
dial-peer voice 6135104 pots
trunkgroup STC
corlist outgoing INTE
destination-pattern 9800.......
forward-digits 10
!
dial-peer voice 6135105 pots
trunkgroup STC
corlist outgoing INTE
destination-pattern 99200.....
forward-digits 9
!
dial-peer voice 6135108 pots
trunkgroup STC
corlist outgoing INTE
destination-pattern 999.
forward-digits 3
!
dial-peer voice 6135109 pots
trunkgroup STC
corlist outgoing INTERNATIONAL
destination-pattern 900T
prefix 00
!
dial-peer voice 6135106 pots
trunkgroup STC
corlist outgoing INTE
destination-pattern 9[2,4,6]......
forward-digits 7
!
dial-peer voice 7000 voip
destination-pattern 7...
session target ipv4:192.168.200.53
voice-class codec 1
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
no vad
!
dial-peer voice 3000 voip
destination-pattern 30..
session target ipv4:192.168.200.53
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
codec g711alaw
no vad
!
dial-peer voice 5555 voip
description "Unity Express - VoiceMail"
destination-pattern 5555
session protocol sipv2
session target ipv4:10.1.22.252
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 9500 voip
destination-pattern 95..
session target ipv4:192.168.10.205
voice-class codec 3
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
no vad
!
dial-peer voice 9400 voip
destination-pattern 94..
session target ipv4:192.168.10.205
voice-class codec 3
dtmf-relay cisco-rtp rtp-nte h245-alphanumeric
no vad
!
!
presence
presence call-list
!
sip-ua
presence enable
!
!
!
gatekeeper
shutdown
!
!
telephony-service
no auto-reg-ephone
em keep-history
max-ephones 50
max-dn 100
ip source-address 10.1.22.250 port 2000
load 7945 SCCP45.9-3-1SR4-1S
voicemail 5555
max-conferences 8 gain -6
web admin system name admin password cisco
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Jul 14 2014 11:14:31
!
!
ephone-template 1
!
!
ephone-dn 1
number 2201
label Islam Abu Zaid
name Islam Abu Zaid
corlist incoming ZERO
!
!
ephone-dn 2
number 2202
label User
name User
allow watch
corlist incoming INTE
!
!
ephone-dn 3
number 2203
label Ryan Malibari
name Ryan Malibari
corlist incoming ZERO
!
!
ephone-dn 4
number 2204
label Guest
name Guest
corlist incoming ZERO
!
!
ephone-dn 5
number 2205
label Guest
name Guest
corlist incoming ZERO
!
!
ephone-dn 6
number 2206
label Naved Khan
name Naved Khan
corlist incoming ZERO
!
!
ephone-dn 7
number 2207
label Omer Banab
name Omer Banab
corlist incoming ZERO
!
!
ephone-dn 8
number 2208
label Mohammed Wafai
name Mohammed Wafai
corlist incoming INTERNATIONAL
!
!
ephone-dn 9
number 2209
label Sudeeb Basu
name Sudeep Basu
corlist incoming INTERNATIONAL
!
!
ephone-dn 10
number 2210
label Mohammed Islam
name Mohammed Islam
corlist incoming ZERO
!
!
ephone-dn 12
number 2212
label Adnan Khan
name Adnan Khan
corlist incoming ZERO
!
!
ephone-dn 13
number 2213
label Mohammed Alshareef
name Mohammed Alshareef
corlist incoming ZERO
!
!
ephone-dn 14
number 2214
label Faisal Al-Olayan
name Faisal Al-Olayan
corlist incoming INTERNATIONAL
!
!
ephone-dn 15
number 2215
label AurArgzaib Mughal
name AurArgzaib Mughal
corlist incoming ZERO
!
!
ephone-dn 16
number 2216
label Mubarak Alhassan
name Mubarak Alhassan
corlist incoming ZERO
!
!
ephone-dn 17
number 2217
label Sultan Fageeh
name Sultan Fageeh
corlist incoming ZERO
!
!
ephone-dn 18
number 2218
label Khaled Abdulghane
name Khaled Abdulghane
corlist incoming ZERO
!
!
ephone-dn 23
number 2223
label Call Center
mobility
snr 90565285270 delay 1 timeout 30
corlist incoming INTERNATIONAL
!
!
ephone-dn 24
number 2224
label Call Center
mobility
snr 90556271732 delay 1 timeout 10
!
!
ephone-dn 25
number 2225
label Call Center
mobility
snr 90569801940 delay 1 timeout 30
!
!
ephone-dn 50
number 2250
park-slot reserved-for 2202
!
!
ephone-dn 51
number 5551..
mwi on
!
!
ephone-dn 52
number 5552..
mwi off
!
!
ephone 1
mac-address 34BD.C82C.D958
username "islam" password coco
type 7911
button 1:1
!
!
!
ephone 2
mac-address 34BD.C82C.DA48
username "imtiaz" password coco
presence call-list
blf-speed-dial 1 2206 label "Naved"
type 7911
button 1:2
!
!
!
ephone 3
mac-address 34BD.C82C.D0B6
username "ryan.malibari" password ryanm
type 7911
button 1:3
!
!
!
ephone 4
mac-address 34BD.C82C.D652
type 7911
button 1:4
!
!
!
ephone 5
mac-address 34BD.C82C.D57B
type 7911
button 1:5
!
!
!
ephone 6
mac-address 34BD.C82C.DAC4
username "naved.khan" password navedk
type 7911
button 1:6
!
!
!
ephone 7
mac-address 04DA.D2BF.018B
type 7942
button 1:7
!
!
!
ephone 8
mac-address A456.3040.D466
type 7965
button 1:8
!
!
!
ephone 9
mac-address 64D9.8969.05A9
button 1:9
!
!
!
ephone 10
mac-address 2401.C73C.8630
max-calls-per-button 2
type 6941
button 1:10
!
!
!
ephone 12
mac-address 2401.C73C.6B93
max-calls-per-button 2
type 6941
button 1:12
!
!
!
ephone 13
mac-address A456.3040.F352
type 7945
button 1:13
!
!
!
ephone 14
mac-address C40A.CBE1.11E9
type 7945
button 1:14
!
!
!
ephone 15
mac-address 5006.04FB.F591
max-calls-per-button 2
type 6921
button 1:15
!
!
!
ephone 16
mac-address 5006.04FB.F5CF
max-calls-per-button 2
type 6921
button 1:16
!
!
!
ephone 17
mac-address 5006.04FB.F596
button 1:17
!
!
!
ephone 18
mac-address 5006.04FB.F64E
max-calls-per-button 2
type 6921
button 1:18
!
!
!
ephone 19
mac-address 64A0.E714.E158
type 7911
logout-profile 1
!
!
ephone-hunt 1 peer
pilot 2222
list 2206
timeout 30
!
!
!
!
line con 0
exec-timeout 0 0
password naghi@123
logging synchronous
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 131
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 0 0
password naghi@123
logging synchronous
login local
transport input all
line vty 5 15
exec-timeout 0 0
password naghi@123
logging synchronous
login local
transport input all
!
scheduler allocate 20000 1000
ntp master
end
the files in the flash in this path:
Directory of flash0:/GUI/*
Directory of flash0:/GUI/CME 8.6.0 GUI/
28 -rw- 4118 May 25 2014 12:00:46 +00:00 admin_user.html
29 -rw- 677820 May 25 2014 12:00:48 +00:00 admin_user.js
30 -rw- 1029 May 25 2014 12:00:48 +00:00 CiscoLogo.gif
31 -rw- 639 May 25 2014 12:00:48 +00:00 CME_GUI_README.TXT
32 -rw- 953 May 25 2014 12:00:48 +00:00 Delete.gif
33 -rw- 16344 May 25 2014 12:00:50 +00:00 dom.js
34 -rw- 864 May 25 2014 12:00:50 +00:00 downarrow.gif
35 -rw- 6315 May 25 2014 12:00:50 +00:00 ephone_admin.html
36 -rw- 4558 May 25 2014 12:00:50 +00:00 logohome.gif
37 -rw- 3978 May 25 2014 12:00:50 +00:00 normal_user.html
38 -rw- 78428 May 25 2014 12:00:52 +00:00 normal_user.js
39 -rw- 1347 May 25 2014 12:00:52 +00:00 Plus.gif
40 -rw- 843 May 25 2014 12:00:52 +00:00 sxiconad.gif
41 -rw- 174 May 25 2014 12:00:52 +00:00 Tab.gif
42 -rw- 2496 May 25 2014 12:00:54 +00:00 telephony_service.html
43 -rw- 870 May 25 2014 12:00:54 +00:00 uparrow.gif
44 -rw- 3412 May 25 2014 12:00:54 +00:00 xml.template
45 -rw- 10230 May 25 2014 12:00:54 +00:00 xml-test.html
256487424 bytes total (165068800 bytes free)
can you tell me which file exactly responcible for the login so at least i will put it in the Flash: directly instead of inside a folder
Regards
07-14-2014 04:47 AM
The Main Flash Directory contain this:
NAGHI-HCV-CME#dir flash:
Directory of flash0:/
1 -rw- 74503236 Aug 7 2012 10:00:16 +00:00 c2900-universalk9-mz.SPA.1
51-4.M4.bin
2 -rw- 2814 Aug 7 2012 10:08:04 +00:00 cpconfig-29xx.cfg
3 -rw- 3000320 Aug 7 2012 10:08:18 +00:00 cpexpress.tar
4 -rw- 1038 Aug 7 2012 10:08:26 +00:00 home.shtml
5 -rw- 122880 Aug 7 2012 10:08:34 +00:00 home.tar
6 -rw- 1697952 Aug 7 2012 10:08:50 +00:00 securedesktop-ios-3.1.1.45
-k9.pkg
7 -rw- 415956 Aug 7 2012 10:09:02 +00:00 sslclient-win-1.1.4.176.pk
g
8 -rw- 780 Aug 29 2013 06:23:28 +00:00 vlan.dat
9 -rw- 195332 Mar 7 2014 15:25:36 +00:00 crashinfo_20140307-152537-
UTC
10 -rw- 69 Jun 5 2014 15:20:18 +00:00 syncinfo.xml
11 -rw- 1996 Jun 5 2014 15:20:20 +00:00 SIPDefault.cnf
12 -rw- 4342 Jun 5 2014 15:20:22 +00:00 softkeyDefault_kpml.xml
13 -rw- 4376 Jun 5 2014 15:20:22 +00:00 softkeyDefault.xml
14 -rw- 825 Jun 5 2014 15:20:22 +00:00 featurePolicyDefault.xml
15 -rw- 3034 Jun 5 2014 15:20:24 +00:00 SEPA4C3617E0D58.cnf.xml
16 -rw- 4642392 May 13 2014 07:06:26 +00:00 apps45.9-3-1ES26.sbn
17 -rw- 581548 May 13 2014 07:06:38 +00:00 cnu45.9-3-1ES26.sbn
18 -rw- 2218505 May 13 2014 07:07:04 +00:00 cvm45sccp.9-3-1ES26.sbn
19 -rw- 363807 May 13 2014 07:07:20 +00:00 dsp45.9-3-1ES26.sbn
20 -rw- 1891377 May 13 2014 07:07:36 +00:00 jar45sccp.9-3-1ES26.sbn
21 -rw- 673 May 13 2014 07:07:42 +00:00 SCCP45.9-3-1SR4-1S.loads
22 -rw- 669 May 13 2014 07:07:52 +00:00 term45.default.loads
23 -rw- 669 May 13 2014 07:08:10 +00:00 term65.default.loads
24 -rw- 10230 May 25 2014 11:50:20 +00:00 xml-test.html
25 -rw- 828416 May 25 2014 11:52:36 +00:00 CME8.6.0.tar
26 drw- 0 May 25 2014 12:00:18 +00:00 GUI
256487424 bytes total (165068800 bytes free)
07-14-2014 05:17 AM
Dears
i also trace the web in the CUE
CUE-BP#
CUE-BP# tra
CUE-BP# trace webi
CUE-BP# trace webInterface all
CUE-BP# tra
CUE-BP# sho tra
CUE-BP# sho trace bu
CUE-BP# sho trace buffer ta
CUE-BP# sho trace buffer tail
Press <CTRL-C> to exit...
4207 07/14 14:56:30.466 webInterface controller "Requested URI " Exit /admin/iw/
InitWizard.do
4207 07/14 14:56:57.215 webInterface controller "Requested URI " Enter /admin/iw
/InitWizard.do
4207 07/14 14:56:57.215 webInterface sysdb "Getting sysdb attribute" /sw/apps/to
mcat/config/httpsKeyLabel
4207 07/14 14:56:57.216 webInterface sysdb "Value"
4207 07/14 14:56:57.216 webInterface sysdb "Getting sysdb attribute" /sw/apps/mo
nitor//ctrl/online
4207 07/14 14:56:57.216 webInterface sysdb "Value" 1
4207 07/14 14:56:57.216 webInterface controller "Requested URI " Center /admin/i
w/InitWizard.do
4207 07/14 14:56:57.217 webInterface initwizard 0 InitWizardAction.perform: wizA
ction: Next next_step: addUser
4207 07/14 14:56:57.217 webInterface proxyAgent "Connection " ITSConnection: log
in(): 10.1.22.250
4207 07/14 14:56:57.217 webInterface proxyAgent "Connection " Call to ITSHTTPCli
ent.getInputStream()
4207 07/14 14:56:57.228 webInterface proxyAgent "Connection " Receiving data. Co
de: 200
4207 07/14 14:56:57.228 webInterface proxyAgent "Connection " Login failed. Prem
ature EOF
4207 07/14 14:56:57.228 webInterface initwizard "Login Failed." LoginException:
CME login failed
4207 07/14 14:56:57.240 webInterface controller "Requested URI " Exit /admin/iw/
InitWizard.do
4207 07/14 15:06:57.405 webInterface session "Logged out" SessionListener logged
out #initwizard session: 396BA9E7CE7F619EA9D81D5E07A8C766
4207 07/14 15:06:57.405 webInterface session "Logged out" SessionListener Number
of admins: 0. Number of users: 0
4207 07/14 15:06:57.406 webInterface controller "Requested URI " Enter /admin/Co
mmon/Logout.do
4207 07/14 15:06:57.406 webInterface sysdb "Getting sysdb attribute" /sw/apps/to
mcat/config/httpsKeyLabel
4207 07/14 15:06:57.407 webInterface sysdb "Value"
4207 07/14 15:06:57.407 webInterface controller "Requested URI " Center /admin/C
ommon/Logout.do
4207 07/14 15:06:57.408 webInterface session "Logged out" Logged out successfull
y
4207 07/14 15:06:57.420 webInterface controller "Requested URI " Exit /admin/Com
mon/Logout.do
07-14-2014 06:07 AM
Try to put one of below below command and then check plz
ip http path flash:/gui
or
ip http path flash:/gui/CME 8.6.0 GUI
Suresh
07-14-2014 01:45 PM
Dears the issue still exist
07-14-2014 07:24 AM
Have following command in your CME, it should fix your problme.
ip http authentication enable
To be sure, you can also verify the HTTP path is correct using: http://10.1.22.250/ccme.html from your browser - you need the username to login it not the web admin ID that you will use on the CUE.
D.L.
07-14-2014 01:46 PM
i login to the cme with the ip http path flash:
and i used my username and it works but for cue still not
07-14-2014 07:34 PM
I had same issue before, try this:
ip http server
ip http authentication enable
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:/GUI
07-14-2014 03:20 PM
Hi,
Can you add this command under telephony-service
authentication credential admin cisco
Where admin is your username and cisco is your password.
Can you access to CME Configuration by HTTP?
Regards.
07-14-2014 07:20 PM
Hello,
A bit confused with what you are trying to achieve but I am assuming that based on the fact that you are tracing the web interface from cue and you earlier said you can log into the CUE gui that your problem is you are trying to get the CUE first time initialization wizard to run:
If your problem is the initialization wizard :
Unfortunately don't think you will be able to access it.
This is a copy from the cisco cue doc: If you log in to the GUI web interface after installation, the initialization wizard is the first screen to appear. You cannot activate it again except by reinstalling Cisco Unity Express software. All the parameters configured through the initialization wizard are available through GUI screens and CLI command
If your problem is the CUE_GUI
Confirm you can log into cue: service module integrated service engine 0/0 session OR STATUS TO MAKE SURE THE ENGINE IS WORKING(There is also an option for password reset).
Confirm you can reach the nme-cue ip from your computer ,if not you can add a static route in your pc ip table.
f your problem is reaching the CME GUI:
Confirm the http server is running
Do sh ip http server status to see the base directory being served.
Try tweaking the http address using the telephony home page ( first log-in to the router default page when presented and then use ip/telephony-service.html, ip/cme...../telephony-service.html, e.t.c
07-15-2014 12:48 AM
Dears
This is a copy from the cisco cue doc: If you log in to the GUI web interface after installation, the initialization wizard is the first screen to appear. You cannot activate it again except by reinstalling Cisco Unity Express software. All the parameters configured through the initialization wizard are available through GUI screens and CLI command
actually im trying to initialize
how can i re-install it
should i disconnect the service-module from the router or is there a steps to do
07-15-2014 04:44 AM
Please use below command from CUE through CLI
offline
(offline)# restore factory default
Please see below link for more info.
https://supportforums.cisco.com/document/14511/unable-reset-or-restore-cisco-unity-express-factory-defaults
Suresh
07-15-2014 05:39 AM
i did that earlier but not working
i initiazlize the system through the CLI but throuhg GUI Didnt work
plus the synchronize between the CME and CUE is not working so i had to added it manually
Regards
07-15-2014 11:54 AM
The factory reset should have worked. Kindly confirm the version of cue( I think it only works for versions later than 2.11). If yours is older you will need to reinstall the software.I will have to advise against it if its just because of the initial wizard. its a lot of stress and everything the wizard does you can do through the cli(you can even do more).
If you just want to erase a config from a previous installation you can use the erase startup config(inside cue session!!!). If you want to reinstall the software you can use the Cisco guide here: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel7_0/install/Install/boothelp.html (Note you must have the image already or be able to download it ) .
07-16-2014 12:59 AM
cisco unity 8.6.
that is the vesion i think i will use the CLI but im worry about the CCIE Lab exam
:(
Thanks fo the help guys
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide