CUE without CME

[Mohamed Raffiudeen]

I have 2911 router serves as a SRST GW in a branch. 30 IP phones in the location are connected to a call manager in main branch via H.323.

Need to setup an auto attendant/IVR functionality for the branch. PSTN lines are terminated in the 2911 router. Is it possible to setup CUE in the same 2911 without installing CME?

[Rob Huffman · Accepted solution]

Hi Mohamed,

Yes, this would be a supported configuration Can you please review the steps in this excellent doc;

CallManager for Cisco Unity Express Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

[Mohamed Raffiudeen]

Hi Rob,

Thanks for the doc. Is it possible to enable GUI for the cue as it makes easy to create custom scripts for AA or IVR.

Cheers...

[Rob Huffman]

Hi Mohamed,

Yes, you will certainly be able to set up the CUE GUI in this config

Cheers!

Rob

[Mohamed Raffiudeen]

Thanks Rob,

I was able to setup the CUE in a SRST router and also GUI functionality works fine. Instead of JTAPI & CTI ports i use SIP dial peer in SRST router pointing to the CUE and plays the AA and again forwarding to CUCM via voip dial-peer...

Thanks & Regards,

M.Mohamed Raffiudeen...