cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
308
Views
0
Helpful
2
Replies
junaidkhan1991
Beginner

Custom Cptone for Qatar

Hello Guys,

 

Does anyone knows the custom-cptone for qatar for Analog telephone line?
 

I have CME Router (ISR 2911) with VIC2-4FXO card

The service provider is Ooredoo Qatar (formerly known as Q-Tel)

Your help will be highly appreciated.

 

 

2 REPLIES 2
Musthafa A
Beginner

Dear Junaid,

U got any solution for this.I am also facing the same issue..

Gordon Charlton
Beginner

From what I have found you need to create a custom cptone with the following settings:

TONE                               FREQUENCY in Hz             CADENCE in seconds

Acceptance tone                              400+450                               0.38 on 0.25 off 0.38 on 2.00 off

Busy tone – I                                      400+450                               0.8 on 0.8 off

Busy tone – II                                    400                                         0.375 on 0.375 off

Busy tone – III                                   400                                         0.5 on 0.5 off

Congestion tone                              400                                         0.40 on 0.35 off 0.22 on 0.52 off

Dial tone                                              350+440                               continuous

Line lock-out tone                           400                                         0.32 on 0.32 off

Number unobtainable tone        400                                         continuous

Refusal tone                                      400                                         continuous

Ringing tone – I                                 400+450                               0.38 on 0.25 off 0.38 on 2.0 off

Ringing tone – II                               400+450                               0.4 on 0.2 off 0.4 on 2.0 off

Special information tone              330+440                               1.0 on 1.0 off

Call waiting tone                               400                                         0.3 on 10.0 off

And set impedance to 600c or 600r

HTH

Gordon

Create
Recognize Your Peers
Content for Community-Ad