Delay in internal dialing

[kumarjeet.acharya]

I have a CUCM 8.x cluster ,which was initially had a 5 digit dial plan for internal and 10 digit for external . I have converted the dial plan to e.164 global pattern . For the internal users I have created a translation pattern to convert the 5 to 10 digit for internal dialing.After the conversion of all the DN to +1 XXXXXXXXXX, there is a delay in dialing internal numbers.

Please help me in this regard.

Zombie..

[Arun Kumar]

Hi

Make sure to uncheck ' Provide Outside Dial Tone' and check ' Urgent Priority' and see if any difference.

Thanks

Arun

[kusatija]

Hello!

Just in case you have already tried what Arun suggested, and the issue still remains, do mention the exact digits you are dialing, all the partitions in the CSS of the phone that you are dialing from.

partitions in the CSS of the TP, along with the route plan report.

Regards

Kunal

[nitsinha]

Run a Dialled number analyzer(DNA) and make sure that you do not have potential matches while making internal calls.

HTH

Regards

Nitesh

PS:Pl rate helpful posts