06-02-2009 02:28 AM - edited 03-15-2019 06:19 PM
I have a requirement to drop incoming calls based on a combination of calling and called number. For example if the number 1234 dials 2345 then the call progresses. However if 1234 dials 4567 then the call is ended.
The calls will be coming in via a QSIG interface into a 2811 router which is a H323 gateway on a CCM 4.1.2 system
06-02-2009 07:58 AM
On a H323 gateway this is possible:
1. create a voice translation-pattern to reject /^1234/
2. Create a voice translation-profile to translate the calling
3.
A.Configure a dial-peer with the inbound calling number of 2345 (from your example)
B.enter call-block translation-profile incoming
06-02-2009 03:26 PM
I think the feature that best fits this scenario will be corlists:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml
This allows you to design things very similar to 'partitions' and 'calling search spaces' within the dial peers.
hth,
nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide