Deutschland Telekom CUCM SIP CUBE Integration For Call Forwarding
We are running CUCM Version 10.5.2.13900-12 with an ASR1002-X as the CUBE Running version 16.6.2.
CUCM ------ CUBE ------ ITSP (Telekom)
We are able to make outbound calls with no problems. The issue comes on Call Forward All from CUCM to the ITSP. I am attaching the integration documentation for integrating from CUCM/CUBE to Telekom.
I have modified the P-ASSERTED-ID to show the E164 number for the Directory Number. If I follow this document it changes all out bound calls to the main number, which we do not want.
We have contacted Telekom and their response was they support 1TR118 and 302 Move Temporarily. But I am unable make either work. Very little information from Cisco on this that I can find. The 1TR118 talks about turning the screening on and of, as I understand it in the From header, but once again, I can't find any way of doing this on the CUBE. When I configure the CUCM Trunk to Use the Last Redirect Number, the call forwards but has the original called number.
This is my first time working with Deutsch Telekom and I am looking for assistance from someone who may have already done this. TAC hasn't been able to resolve the issue.
I can provide the config and call traces on request, looking for some guidance.
Les stations de radio en ligne sont devenues l'une des formes de partage des médias les plus populaires dans la ecouter radio en ligne société d'aujourd'hui. La radio Internet est maintenant disponible sur tous les principaux modems de câbles et sans fil ...
This document describes the details about the Cisco Collaboration Endpoint software upgrade error “File too large”, and guides through the possible workarounds to upgrade the endpoint to the desired version.
we have recently announced a new Webex Events service with a best-in-class virtual event experience that is video-centric, intelligent, and simple to use.
Some highlights (features of new Webex Events that were not there with existing/c...
The purpose of this document is to present the different troubleshooting steps to take when some service from the Cisco IM & Presence Service Server have not started gracefully.
The States of a service
The IM&P ...
This event had place on Tuesday 20th, April 2021 at 10hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees learned how to use ...