12-12-2006 12:17 PM - edited 03-14-2019 07:11 PM
Has anyone every run into an issue with DHCP for the IP Phones. When I debug I get the errors.
DHCPD: Allocate an address without class information (10.1.1.0)
DHCPD: subnet [10.1.1.1,10.1.1.126] in address pool ITS is empty.
No ip addresses have been allocated so I'm not sure why the pool is empty.
ip dhcp pool ITS
network 10.1.1.0 255.255.255.128
option 150 ip 10.1.1.124
default-router 10.1.1.124
Thanks,
12-12-2006 05:38 PM
Do you have "ip classless" in the global config? Does this subnet match an interface on the router?
-Scot
12-13-2006 06:13 AM
Yes. ip classless is enabled and the subnet matches the interface. I used the mac add of the ip phone to assign the ip address and this worked but now the ip phone has the error message "Protocol Application Invalid".
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide