Dial-peer destination-pattern priority

[cm6043]

Dear all,

There are two dial-peer with 69[0-9] and 69T. Is there any priority which dial-peer will be selected first ? The following dial-peer is in Shengzhen voice router.

When user dial 691, what dial-peer will be selected ?

----------------------------

dial-peer voice 102 voip

description To Hong Kong Local Extension

destination-pattern 69[0-9]

session target ipv4:10.1.1.2

dial-peer voice 3 pots

trunkgroup PABX

description To Shangzhen Outgoing Call

destination-pattern 69T

forward-digits all

-------------------------------

Thanks

Man Leung

[Sushil Kumar Katre]

Hi Man,

You have got two dial peers with same preference (0 - default preference).

Most specific dial peer should match -

Dialed Number - 691

Dial peer 102 - 69[0-9] - Possible matches - 690 to 699

Dial Peer 3 - 69T - Possible matches - 690 to god knows, because T can accept any number of digits.

Thus in my opinion it should match Dial Peer 102

-> Sushil

[KonradStepniewski]

Dial-peer 69[0-9] will be taken as it is best match in your example. Always best match dial-peer is taken into account.

On your exmaple first one cover 690 to 699 patterns where another one with T covers unlimited number of patterns.

rate if this help

[cm6043]

Thanks for your information. As I previously config to the following, it is not working when customer dial 691. So, I will reconfig the dial-peer 102 and try whether it is working.

dial-peer voice 102 voip

destination-pattern 6..

Thanks

Man Leung