I have these 4 dial peers and trying to get specific numbers to take a different peer but number keeps getting matched with wild card peers, 4002 and 5000. Instead of the more specific e164 peers 80057 & 800.
Example:
dial-peer voice 4002 voip
rtp payload-type comfort-noise 13
session protocol sipv2
incoming uri via pstn
voice-class codec 1
voice-class sip early-offer forced
voice-class sip tenant 900
dtmf-relay rtp-nte
no vad
dial-peer voice 5000 voip
description outbound to CUCM
destination-pattern +...........$
session protocol sipv2
session server-group 100
voice-class codec 1
voice-class sip early-offer forced
voice-class sip tenant 500
dtmf-relay sip-kpml rtp-nte
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
no vad
dial-peer voice 80057 voip
no modem passthrough
session protocol sipv2
session server-group 100
destination e164-pattern-map 100
voice-class codec 2 offer-all
voice-class sip tenant 500
voice-class sip pass-thru content sdp
dtmf-relay rtp-nte
fax-relay ecm disable
fax-relay sg3-to-g3
fax protocol t38 version 0 ls-redundancy 2 hs-redundancy 0 fallback pass-through g711ulaw
no vad
dial-peer voice 800 voip
no modem passthrough
session protocol sipv2
incoming uri via pstn
incoming called e164-pattern-map 100
voice-class codec 2 offer-all
voice-class sip tenant 900
voice-class sip pass-thru content sdp
dtmf-relay rtp-nte
fax-relay ecm disable
fax-relay sg3-to-g3
fax protocol t38 version 0 ls-redundancy 2 hs-redundancy 0 fallback pass-through g711ulaw
no vad
