Digit from telco via DID port

[lampard1398]

I am using CME router with VIC-2DID card. I find that the cme router did not receive any digit from telco. But telco said they send 3 digit (e.g. 311) to the router

Is this related to timer setting?

Is there any debug command for checking the digit from telco to DID port?

[paolo bevilacqua]

Hi Lampard,

This is the troubleshooting doc, have you configured did-digit-length ?

http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008010ff92.shtml

Please rate this post if useful.