03-02-2009 04:52 AM - edited 03-15-2019 04:33 PM
Hi,
I configured the new PRI with mgcp.When i dial the DID number the calls get conncted to the router and giving the dial tone,its not passing the digits to the call manager.
Thanks,
gnan.
03-02-2009 07:11 AM
What the output of "show ccm-manager" looks like? Does it show "registered" with the IP address of the CCM? Have you tried to reset the MGCP?
router(config)#no mgcp
router(config)#mgcp
MK
03-02-2009 09:29 PM
Hi,
Now i reconfigured to h.323.After that also i am facing the same problem.Calls are hitting the router,and immidiately giving the dial tone.then i dial the extension,i am able to reach the extension.But idealy the calls should be reach without diaing number ,after the call reached the router.
Thanks,
Gnanesh
03-03-2009 04:14 AM
Post a DEBUG ISDN Q931 also have you configured Direct-inward-dial on the POTS and incoming called-number.
dial-peer voice 2 pots
incoming called-number .
direct-inward-dial
port 0/0:23
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide