08-13-2012 04:32 AM - edited 03-16-2019 12:40 PM
Hello,
We're using CUCM 8.6, and a MsActiveDirectory as LDAP Directory.
In the system,there are person that have not Last Name but just FirstName only.
When we make searh in the corporate directory, these person (that have firstname only) are not seen.
Is there any way to tell the CUCM to show directory information even if there are only the FirstName in the Active directory?
Regards,
Antra
Solved! Go to Solution.
08-13-2012 06:11 AM
They are not sync with cucm you will need To fill the last name field on AD.
See this doc:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html
Rate this If helps you
Regards
Leonardo Santana
Sent from Cisco Technical Support iPhone App
08-13-2012 06:11 AM
They are not sync with cucm you will need To fill the last name field on AD.
See this doc:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html
Rate this If helps you
Regards
Leonardo Santana
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: