Disabling phone directory lookup

[MattNicholls_2]

I have built up phone to be used during video arraignment by in-custodies. I want to disable all of the button funtions. I have already set up the phones in their search spaces to auto dial it's sister phone. At the bottom of the phone configuration page I have disabled "Settings Access" and I am not able to see the network settings but I can still search the phone directory to see other extensions.

I've search the Cisco site and google but I am having problems finding a clear solution. Does anyone know of a solution? We are using CCM 4.1(3)sr7 and the phones in use for this project are 7911 and 7912.

Thank you.

[Rob Huffman · Accepted solution]

Hi Matt,

For the phones in question you can enter a "fake" url under the Phone config page (Directory)

Cisco IP Phone - External Data Locations (leave blank to use default)

Directory Url

http://blah/CCMCIP/xmldirectory.asp

Hope this helps!

Rob

[MattNicholls_2]

Yep that did it thank you very much for the quick reply.

[Rob Huffman]

Hi Matt,

Good stuff! Glad this worked for you.

Take care and thanks,

Rob

[Mike Bullough]

This seems to work fine on the 7912 but not on the 7911. We are using CUCM 7.13b. Still looking for help on this.

[William Bell]

Mike,

For 7.1 there are better options for disabling the directory lookup on stations. See the followin URL (easier than typing it all out here).

http://www.netcraftsmen.net/resources/blogs/how-to-disable-corporate-directory-in-cucm-7x.html

HTH.

Regards,
Bill

Please remember to rate helpful posts.

[Mike Bullough]

Thank you! That worked great. Just what I was looking for.

Mike