Documentation for integrating VG350 with CUCM

[Steve Snodgrass]

I have a CUCM 9.0 cluster and a VG350 analogy gateway.  I've been looking through the documentation sections of CCO, but I'm having real trouble finding documentation on how to set up the VG350 as a gateway for CUCM.  Does anyone have a pointer?

[Harmit Singh]

Hi Steve,

I didn't find much on CCO either except for a few lines in the following doc:

http://www.cisco.com/en/US/docs/routers/access/vg350/software/configuration/guide/scgapp_platforms_ORIG.html#wp1085730

Not sure if you already saw this or not.

HTH.

--
Regards,
Harmit.

[Steve Snodgrass]

Yes, I found that already, as you said there's very little there.  I was hoping for something a little more substantial.  Thanks for looking though.