Does SIP ip phone 9971 support Unified IP Color Key Expansion Module on CME ?

[ievalleyccie]

I have IP Phone 9971 with Unified IP Color Key Expansion Module .

Can i Configure it on CME system?

[dawid.grote]

I heard it is supported since CME 9.1, is that correct?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html

But where can I download the firmware? I could find it in the download section.

Can someone help?

[Rob Huffman]

Hi David,

That is most correct my friend

Here's the version history note;

9.1

KEM Support for Cisco Unified 8961, 9951, and 9971 SIP IP Phones

Increases line key and feature key appearances, speed dials, or programmable buttons on Cisco Unified SIP IP phones.

from;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Here's the path for the firmware that is listed in the doc you linked;

Downloads Home

Products

Voice and Unified Communications

IP Telephony

Unified Communications Endpoints

Cisco Unified IP Phones 9900 Series

Cisco Unified IP Phone 9971

Session Initiation Protocol (SIP) Software-9.2(3)

9971 SIP Firmware files only- Compatible CUCM Versions: 7.1(3)+

cmterm-9971.9-2-3-27.zip

Cheers!

Rob

"And if I should fall behind
Wait for me" - Springsteen

[dawid.grote]

Hi Rob!

Thanks for the quick answer! Probably I think I need an other Firmwareload, cause I use a 8961 IP Phone.

As mentioned in this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme90spc.html

there should be following Firmwareloads available:

SIP9971.9-2-3-27.loads

SIP9951.9-2-3-27.loads

SIP8961.9-2-3-27.loads

Can u tell if the SIP9971.9-2-3-27.loads also works fine for 8961? Or may you can tell where to get the 8961 Firmware?

Many Thanks!

[Rob Huffman]

Hi David,

Sorry about that, I was thinking 9971 for some reason

Here is the similar path for the 8961;

Downloads Home

Products

Voice and Unified Communications

IP Telephony

Unified Communications Endpoints

Cisco Unified IP Phone 8900 Series

Cisco Unified IP Phone 8961

Session Initiation Protocol (SIP) Software-9.2(3)

8961 SIP IP firmware files only  - Compatible CUCM Versions: 7.1(3)+

cmterm-8961.9-2-3-27.zip

Cheers!

Rob

"And if I should fall behind
Wait for me" - Springsteen