DP for CME 7.1

[love2xlr8]

Hello guys and gals,

I'm trying to build a simple voice network containing a 2801 CUE, and a 3548, and few Cisco IP phones.. I signed up for with a SIP trunk company which will forward the few DID's for a fee to my CME..

I have created the intial configurations and have the phone registeres, and by default.. So the senario I'm trying to build is:

2 DID's  first 212-999-9090 would ring on  ext 5000 that would is configured in all the phones, and the second 212-999-9091 that would ring on someone's ext. 5005 let's say..

Can someone shed some lights on how's this accomplished ?

Any input is appreciated.

Attached is my current config:

[Chris Deren]

Build a translation rule and profile apply it either to incomig dial peer or telephony-service, the rule would be:

voice translation-rule 1

rule 1 /2129999090/ /5000/

rule 2 /2129999091/ /5005/

!

voice translation-profile DID-to-Ext

translate called 1

!

telephony-service

translation-profile outgoing DID-to-Ext

HTH,

Chris

[love2xlr8]

Chris,

Thank you!! I appreciate it..

[Chris Deren]

Glad to be of service. 

Please remember to rate all useful posts!

Chris