im having some problems with calls to the pstn with a specific E1 in my gateway. The problems is that when i call to a local number in the PSTN
when the dial-peer match some channel of the E1 "B", the call sometimes is completed and sometimes it just get frozen, the phone shows the called number but nothing happend.
I have one E1 "A" with a Service Provider "X" and another E1 "B" (0/1/0) with Service Provider "Y"
The E1 "B"(0/1/0) is the one that is presenting the problems
Performing some show commands i obtained that the ports on that specific E1"B" stay as "WAIT RELEASE"
0/1/0:1.1 g711ulaw n S_CONNECT R2_Q421_OG_ANSWER
0/1/0:1.2 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.3 - - - R2_Q421_IDLE
0/1/0:1.4 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.5 - - - R2_Q421_IDLE
0/1/0:1.6 - - - R2_Q421_IDLE
0/1/0:1.7 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.8 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.9 - - - R2_Q421_IDLE
0/1/0:1.10 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.11 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.12 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.13 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.14 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.15 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.17 - - - R2_Q421_IDLE
0/1/0:1.18 g711ulaw n S_CONNECT R2_Q421_OG_ANSWER
0/1/0:1.19 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.20 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.21 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.22 - - - R2_Q421_IDLE
0/1/0:1.23 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.24 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.25 - - - R2_Q421_IDLE
0/1/0:1.26 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.27 - - - R2_Q421_IDLE
0/1/0:1.28 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.29 - - - R2_Q421_IDLE
0/1/0:1.30 g711ulaw n S_WAIT_RELEASE R2_Q421_WAIT_IDLE
0/1/0:1.31 g711ulaw n S_CONNECT R2_Q421_OG_ANSWER
Router
model: CISCO2951/K9
IOS =
C2951-UNIVERSALK9-M), Version 15.2(1)T1
I hope someone can help me with this issue.
Regards!