Erase config of 7941 phones

[kolkatagtc]

Hi,

Are there any ways to erase the configs of 7941 IP Phones.

Thanks in advance.

[msolak]

Hi,

erasing the config is a little different from 7960/7940.

Have a look at this link:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a00807246d6.html#wp1031642

regards

mehmet

[yeskriya007]

Hi Mehmet,

I have 7941G. Some 20 phones are stuck in the intial screen. It says upgrading...and it would not boot. Expecting your valuable suggestion. Couldnot idetify where the problem is. Tried another working phone on the same port. It boots fine. The tftp server is fine.

Thanks in advance,

Karthi