annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 
cancel
583
Visites
0
Compliment
2
Réponses

Estimating phone firmware upgrade duration

dual_line
Level 1
Level 1

I need to upgrade a large number of cisco phones spread across multiple sites with varying bandwidth.

Is there any way I can estimate the time it will take to upgrade a specific site based on the number of phones, firmware image size, WAN bandwidth etc?

1 SOLUTION APPROUVÉE

Solutions approuvées

Jaime Valencia
Cisco Employee
Cisco Employee

Table 3-4 TFTP File Transfer Times for SCCP Devices

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/netstruc.html#wp1050963

If not your version just open the SRND from your version in same chapter for specifics.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Voir la solution dans l'envoi d'origine

2 RÉPONSES 2

Jaime Valencia
Cisco Employee
Cisco Employee

Table 3-4 TFTP File Transfer Times for SCCP Devices

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/netstruc.html#wp1050963

If not your version just open the SRND from your version in same chapter for specifics.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

why don't you enable peer firmware sharing first then perform your upgrades, it will save lots of time when upgrading firmware.

There are dependencies but if your lucky you'll using a similar phone type and thus pulling the image once over the WAN.