06-15-2011 08:03 AM - edited 03-16-2019 05:28 AM
Dear NetPro gurus,
For Cisco CME 8.x, is it possible whether there are any scripts OR Excel spreadsheet that can be used to import into CME config rather than having to type in the CME commands line-by-line?
Cheers
Solved! Go to Solution.
06-15-2011 09:12 AM
Have a look at the CallManager Express Quick Config Tool (QCT), this hasn't been updated for some years but is still available for download.
http://www.cisco.com/cgi-bin/tablebuild.pl/cme-qct
It will generate Ephone / Ephone-DN Configs and a US dial plan, it has limitations but will import from a spreadsheet.
Hope this helps,
Craig
(PLEASE RATE HELPFUL POSTS)
06-15-2011 08:29 AM
If there are, I've never seen them released.
06-15-2011 09:12 AM
Have a look at the CallManager Express Quick Config Tool (QCT), this hasn't been updated for some years but is still available for download.
http://www.cisco.com/cgi-bin/tablebuild.pl/cme-qct
It will generate Ephone / Ephone-DN Configs and a US dial plan, it has limitations but will import from a spreadsheet.
Hope this helps,
Craig
(PLEASE RATE HELPFUL POSTS)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide