Extensions in CME

[techguy]

Hi,

Is it possible to make 2 blocks of extension in one cme gateway which cannot talk to each other? Let us say 1xxx and 2xxx. Extensions starting from 1xxx shouldnt reach to extenstion starting from 2xxx.

If so, then how? Thanks

[Harmit Singh]

Hi omerpal1190,

Yes this can be achieved by configuring Class of Restriction (COR). Here is a doc which explains how to configure COR:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

HTH.

Please rate if helpful.

Regards,

Harmit.