I would like to configure a couple of 7960G's using a 3750 switch but currently stuck on upgrade screen.
I have performed a hard reset of both phones and connected both to a 3750 switch with vanilla settings. The switch is the only source of power. I have connected the switch to a pc running TFTP server hosting the 7960 SIP files in the .zip downloaded from Cisco and a generic CNF file I found on the net.
I am stuck on the upgrade screen. My questions are:
1. Do I need to use an external power pack to flash the phone or does PoE suffice?
2. Can the phone can get files via the switch/pc set up?
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...
To participate in this event, please use the button to ask your questions
Tour of the Real-Time Monitoring Tool
Have any questions about the Real-Time Monitoring Tool?
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to...
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees wil...
The purpose of this document is to provide troubleshooting insight into a well-known issue for the IM&P nodes when going to the Presence Topology Page and seeing all the services as Unknown, even though they are started as shown on the ...