cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forwarding calls from Microsfot UM 2007 to cucm 8.5 is not working

Jamil Hussain
Beginner
Beginner

Good Day,

Dear Cisco support team,

I have a setup where i have running cisco unified communication manager 8.5 , Publisher and subscriber.

I have Mircrosoft Exchange UM 2007 for auto attendant and  voicemail.I have created a sip trunk between Microsfot UM and CUCM and a route pattern for pilot number pointing to sip trunk.

When i am calling from outside to pilot number it play the prompts but when i dialled the extension number i.e 2993 it return me the message that cannot transfer the call.

I have captured the logs and  found error SIP/2.0 404 Not Found and Sending ERROR Response to the transport layer

I have also attached the error logs.Kindly check and advise me what might be the problem.

Regards

Jamil Hussain                 

1 REPLY 1

j.huizinga
Frequent Contributor
Frequent Contributor

Hi,

Check the:

"Rerouting Calling Search Space" and "Out-Of-Dialog Refer Calling Search Space"

Jan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: