Syed,
If your branch gateway is H323.
Add something along these lines
!
!
trunk group PSTN-ACCESS
! THIS DEFINE THE TRUNK GROUP
!
dial peer voice 9 pots
description *** OUTGOING PSTN ***
destination-pattern 9T
incoming called-number .
trunkgroup PSTN-ACCESS
!
!### POINTS THE DIAL PEER AT THE TRUNK GROUP
!
voice-port 1/0/0
description *** PSTN LINE 1 ***
trunk-group PSTN-ACCESS
!
!### MAKES THIS FXO PORT PART OF THE TRUNK GROUP
!
voice-port 1/0/1
description *** PSTN LINE 2 ***
trunk-group PSTN-ACCESS
!
!### MAKES THIS FXO PORT PART OF THE TRUNK GROUP
!
voice-port 1/0/2
description *** PSTN LINE 3 ***
trunk-group PSTN-ACCESS
!
!### MAKES THIS FXO PORT PART OF THE TRUNK GROUP
!
voice-port 1/0/3
description *** PSTN LINE 4 ***
trunk-group PSTN-ACCESS
!
!### MAKES THIS FXO PORT PART OF THE TRUNK GROUP
!
Regards,
Alex.
Please rate useful posts.
Regards,
Alex.
Please rate useful posts.