01-24-2013 10:37 AM - edited 03-16-2019 03:21 PM
Hello All,
I have a CME site that has several FXO lines connecting to telco. There have been several reports of dropped calls, in the middle of the conversation. I want to know how to identify the problem and figure out whether the issue is in our network or with Telco .
Please let me know what debugs to run. I'm sure a disconnect can be sent both ways (ie from our system to Telco and vice versa)
Any help would be appriated,
Ayaz Khan
01-24-2013 11:25 AM
If possible, you need to look at show call history voice to see the disconnect cause. This will give you a starting point as to why the call was disconnected.
--
-Mark Turpin
01-24-2013 07:20 PM
You can also enable syslogg server logging on the router and capture debugs for an affected call:
Deb voice ccapi inout
Deb vpm signal
Sent from Cisco Technical Support iPhone App
01-25-2013 07:47 AM
We have two bugs related to DSP for the IOS. Going to upgrade tonight and see if the issue goes away. If not then I'll try syslogg server.
01-25-2013 05:06 PM
Good!
Let us know how it goes
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide