hi all,
I have a CCME10 with ISR2911.
Incoming calls to AA keeps ringing even when caller hangs up the call. I have no issue if it is a direct incoming call to extension(connection plar opx).
Is there any way i can get the call to disconnect correctly with AA?
I tired using "supervisory disconnect anytone" on the voice-port 0/0/0 solved my problem, BUT it messed up my outgoing call. Outgoing call only rang once, then it gets cut off
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone DST
caller-id enable
application
service aa flash:app-b-acd-aa-3.0.0.2.tcl
paramspace english index 1
param number-of-hunt-grps 2
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param aa-pilot 6000
paramspace english location flash:
param second-greeting-time 60
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param voice-mail 6000
param max-time-call-retry 700
param service-name queue
!
service queue flash:app-b-acd-3.0.0.2.tcl
param queue-len 10
param aa-hunt3 3333
param number-of-hunt-grps 1
param aa-hunt2 2222
param queue-manager-debugs 1
dial-peer voice 3000 pots
service aa
incoming called-number 6000
port 0/0/0
forward-digits all
