Hi Guys,
My Customer have a Gateway 2921 with SIP Configured. In this equipment too having a FXO that not is identify the Caller ID. The Carrier told that identifier call is enable. Below the configuration FXO port. Are there another configuration to do in FXO interface?
voice-port 0/0/1
supervisory disconnect dualtone mid-call
cptone BR
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 6556
station-id name TRONCO-NET
caller-id enable
Currently, when I dialed to number the User verify in the display only information: TRONCO-NET and not appear the number.
Any have idea about this?
Thanks,
Wilson
