Solved: And exactly what have you

ciscoceci · ‎02-23-2015

Hi,

i have to configure a gateway Vg320 over CUCM 10.5, anyone could give an example configuration?

When i configure the CUCM config doesn´t download to the gateway,

I can see the below error when i write "sh ccm-manager config-download"

CCM MANAGER APPLICATION IS NOT CONFIGURED

Thanks Anna.

Dennis Fogler · ‎02-23-2015

Sounds like you might be having an ip address to name resolution issue on the VG. Try putting an "ip host" entry in the VG for Communications Manger.

Let me know if this helps. -Dennis

Jaime Valencia · ‎02-23-2015

And exactly what have you configured in the GW???

HTH

java

if this helps, please rate

ciscoceci · ‎02-24-2015

Thanks Dennis, Jaime,

The problem was that i have configured in CUCM web (Device config) a domain name as "xxxxxx.com" and the correct is "gw.xxxxx.com"

thanks.

Dennis Fogler · ‎02-23-2015

Sounds like you might be having an ip address to name resolution issue on the VG. Try putting an "ip host" entry in the VG for Communications Manger.

Let me know if this helps. -Dennis

Gateway VG320 mgcp config. error