Geolocation on CUBE

[jose.albino]

Hello,

I have configure geolocation on the CUCM and it is sending the GEOLOCATION information into the CUBE. But at the moment this information is not being passed over to the operator and being dropped on CUBE.

I have also enabled CUBE to send all the mid-call signalling to the operator but this is not working.

Has anyone already configured this feature?

At the moment i have tried something like:

- Party B <----< SBC Operator <----------< Cisco CUBE <-----<  CUCM <-----< Party A

And the Geolocation information is being dropped on CUBE.

Best regards.

Jose

[jose.albino]

Hello,

I have seen that the 7600 supports this draft:

draft-ietf-sip-location-conveyance

http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_cisco_7600_series_session_border_controller.html

But there is not detail how is this implemented. I would need the feature is available on the ISR Routers, but it does not appear on the Feature navigator..

Any thoughts about this.

Regards,

Jose

[jose.albino]

Hello,

Here is also a bit more about this feature.

Regards,

José