cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
999
Views
0
Helpful
5
Replies

H323 Gateway error

ayoussef.kamal
Level 1
Level 1

Gents,


I have the below repeated errors appear on H323 GW registered to CUCM 6.1

WHY??

088742: Jul 12 12:56:14.193 BST: %SKINNYSERVER-3-NOINIT: Can't initialize Skinny server

088743: Jul 12 12:56:14.193 BST: %SKINNYSERVER-3-NOINIT: Can't initialize Skinny server

1 Accepted Solution

Accepted Solutions

Hi,

There is a similar problem on this thread here and this can be caused by a few things. You dont seem to have any sccp configuartion so this may be memory related..

https://supportforums.cisco.com/thread/282652

I suggest you reboot the router. That should do it.

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

View solution in original post

5 Replies 5

Sharon Tom
Cisco Employee
Cisco Employee

do you have telephony-service or call-manager fallback configured on the router?

if so then it may be a problem with skinny stack. try doing "shut" "no shut" under telephony-service/call-manager fallback if configured.

if the issue still exists provide the following details:

sh version

sh run

sh sccp

Please find the below:

 

 

Hi,

There is a similar problem on this thread here and this can be caused by a few things. You dont seem to have any sccp configuartion so this may be memory related..

https://supportforums.cisco.com/thread/282652

I suggest you reboot the router. That should do it.

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

nikshah
Cisco Employee
Cisco Employee

might worth a shot

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCeh67334

check your ios version.

might have a socket leak. The show socket command should tell you how many socket are opened

check the ram on yr router could be a possible RAM issue.

Hope this helps

Niket

Kindly rate useful posts!!!

Thank you aokanlawon. You are