cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
0
Helpful
0
Replies
Highlighted
Beginner

how can I display caller ID on cisco IP phone Using CUCM

Dear All;

I have H323 GW (2911) with FXO port (VIC2-4FXO) ; the FXO confeguration and dial-peer  like this :

voice-port 0/2/3

connection plar opx 4782268

caller_id enable

!

dial-peer voice 4782268 voip

translation-profile incoming phone7

answer-address 4782268

destination-pattern 4782268

session target ipv4:192.168.1.200

!

voice translation-rule 7

rule 1 /^9/ /79/

!

voice translation-profile phone7

translate called 7

!

dial-peer voice 79 pots

destination-pattern 79T

port 0/2/3

!

my scenario is when the call comes on fxo it be directed to extenssion number 4782268 successfully, but without any information of caller id,

it displayed "Unknown Number" , the Caller ID Presentation service is activated from the local PSTN and I tested the line using normal analog phone ;

I can get Caller ID ( DN + name) only from internal calls, but calls incomming form PSTN it gives "Unknown" .

PLease if any one has idia to solve this problem ;

Note : we use CUCM 8.5

Thanks inadvance ;

Rashed

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards