How long does upgrade take

[John Huthmaker]

I am updating from 8.6.2 to 8.6.2.2.  Its about 75 minutes in to the update and running cleanup.  How long does it usually take to complete?           

[Aman Soi]

Hi John,

I think it would take about  1hour and 35-40 minutes.

regds,

aman

[John Huthmaker]

Thank you for the response.  It must be close.  Its now moved to steps 5 of 6 on the cleanup.  I'm right around an hour and a half.  I'm thinking another 15 minutes.

[John Huthmaker]

2 hours in.  Still running.  But no errors yet (other than my browser disconnected and I had to launch it again).  So I think I'm going to be good.

[John Huthmaker]

2.5 hours in...I'm keeping the thread open so others can get an idea of how long if they are planning to upgrade.

[Aman Soi]

Hi John,

Is it still going on ?

regds,

aman

[John Huthmaker]

Yes.  Its on some script.  Says its running.  I've been doublechecking through the CLI which also says its running.  I have no reason yet to beleive its going to fail.  Just think its taking a while.

I have to do the subscriber when I'm done with the publisher, so I'm really hoping to finish this one up soon.

[Aman Soi]

Hi John,

From Subscriber OS Administration page, can u share output of

show version active and show version inactive

regds,

aman

[John Huthmaker]

This is from the CLI of the subscriber

admin:show version active

Active Master Version: 8.6.2.20000-2

Active Version Installed Software Options:

cmterm-bfcp-e.8-6-2.cop

admin:show version inactive

No Inactive side available

Executed command unsuccessfully

admin:

Did you want me to do the same on the Publsher?  Thats the one I'm patching at the moment.

[Aman Soi]

Hi John,

If possible,please share.

Any specific reason why u are upgarding?

regds,

aman

[John Huthmaker]

Im getting ready to install Calabrio voice recording.  Their product didnt work well with the patch level we were on.

Here is the output from the CLI of the publisher

admin:utils system upgrade status

Upgrade status: Installing

  Upgrade file: UCSInstall_UCOS_8.6.2.22900-9.sgn.iso

   Upgrade log: install_log_2013-04-26.19.06.45.log

admin:show version active

Active Master Version: 8.6.2.20000-2

Active Version Installed Software Options:

cmterm-bfcp-e.8-6-2.cop

admin:show version inactive

Inactive Master Version: 8.6.2.22900-9

Inactive Version Installed Software Options:

cmterm-bfcp-e.8-6-2.cop

admin:

[Aman Soi]

Understood u are upgrading from 8.6.2.20000-2 to 8.6.2.22900-9.

regds,

aman

[John Huthmaker]

Just finished.  Final time 3 hours and 4 minutes.

[Aman Soi]

Hi John,

Did u switchover to new version ?

regds,

aman

[John Huthmaker]

Yes, I had chose to change version and reboot with the install.  Total time to install was almost exactly 3 hours.  Then another 15 minutes to reboot.  Its up now.  I just started patching my Subscriber.

When I finish that, I'll reload the jabber for everyone cop file and call it a night.