cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6413
Views
4
Helpful
1
Replies
Highlighted

How to access CUE GUI on Cisco Router 2911

Dear All,

We are newbie on Cisco IP Telephony solution. Currently we want implement CUCM using 2 MCS7825 and 1 Cisco Router 2911 as voice gateway (with auto attendant feature on Cisco router 2911).

Cisco Router 2911 come with configuration like this

- Cisco2911-V/K9, qty:1

- SL-29-UC-K9, qty:1

- SL-29-IPB-K9, qty:1

- NM-HDV2, qty:1

- VIC2-4FXO, qty:5

- FL-CUE-PORT-2, qty:5

- ISM-SRE-300-K9, qty:1

Cisco Router 2911 come with Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(1)T2.

Note: we still use startup-config that already exist on Cisco Router 2911.

Now we want configure Cisco router 2911 as auto-attendant, but we cannot access Cisco Unity Express (CUE) on Cisco Router 2911.

On show version we see like this

1 Internal Services Module (ISM) with Services Ready Engine (SRE)

   Cisco Unity Express 8.6.1 in slot/sub-slot 0/0

We have question about it, Our question:

- What configuration on Cisco Router 2911 that we need to access CUE  GUI on Cisco Router 2911?

We attach show version, show running-config, show flash, show inventory (Cisco_2911-capture.txt)

We hope you can give us information about it.

Thanks For Your Attention

Everyone's tags (6)
1 REPLY 1
Collaborator

How to access CUE GUI on Cisco Router 2911

Hi

Follow below link to configure your ISM module

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/installsre.html

After that follow below link for CUE configuration

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml

Regards

Ronak Patel

Rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards