How to apply "media flow-around" voice/media loop

[ivpere0032]

Hi people, we have na issue with a crash on router gateway.

258  -rw-      227471   Aug 8 2016 14:07:40 +00:00  crashinfo_20160808-140739-UTC

 259  -rw-      258182  Aug 12 2016 18:48:42 +00:00  crashinfo_20160812-184843-UTC

According to https://bst.cloudapps.cisco.com/bugsearch/bug/CSCus45019/?referring_site=bugquickviewredir

how could we know which is the dial-peer in loop.

Thanks

Regards,

Ivan

[Gregory Brunn]

If this is a SIP CUBE config you can do it globally if you are indeed seeing this bug.  

Voice service voip

sip

media flow-around

[ivpere0032]

Hi Gregory, thanks for your help. It´s not a SIP CUBE, so we have to apply the command in the dial-peer on loop  right? Thanks !

[Gregory Brunn]

No documentation states you can still do it globally

enable

conf t

voice service voip

media flow-around

http://www.cisco.com/c/en/us/td/docs/ios/voice/cube/configuration/guide/15_0/vb_15_0_Book/vb-gw-h323h323.html#wp1318898

[Gregory Brunn]

Why don't you just upgrade you IOS code to the version that is not affected by the bug and rule it out?

[ivpere0032]

We did the upgrade, but i will verify the information with the versions and let you know. Also we will try the command globally that you said..

Thanks ! you helped a lot.

Regards,

Ivan