How to establish telnet/ssh session from a CUCM 9 to a gateway

[amine..dahel]

Hi,

I'm working on CUCM 9.1 and I want to establish a ssh/telnet session to a Cisco H.323 gateway.

Can you guys show me how to do this?

Thanks in advance, guys 

[Vivek Batra]

H.323 gateway is not a special device rather a standard IOS. You need to follow the same process as with any standard Cisco router.

- Vivek

[amine..dahel]

Can you give me the the cammand line that I should enter in CUCM (in CLI) to establish ssh/telnet

session.

Thanks, Vivek, fro the feedback

[Vivek Batra]

Why do you want to login from CUCM CLI?

Simply use PUTTY/Telnet and login to router. Isn't it?

- Vivek

[amine..dahel]

It's not that simple, my pc can't ping the gateway, but I can ping the gateway from the CUCM CLI interface

that's why I'm asking if there is way to establish a telnet/ssh session from the CUCM into the gateway.

[Carlo Poggiarelli · Accepted solution]

Hi.

AFAIK CUCM doesn't have a ssh client.

If you are on a virtual environment, you can ssh to your esxi and from there smyou can ssh your gateway.

HTH

Regards

Carlo

[amine..dahel]

Thank you, Carlo, for your confirmation