11-05-2015 06:45 AM - edited 03-17-2019 04:49 AM
Hi,
I'm working on CUCM 9.1 and I want to establish a ssh/telnet session to a Cisco H.323 gateway.
Can you guys show me how to do this?
Thanks in advance, guys
Solved! Go to Solution.
11-05-2015 11:56 AM
Hi.
AFAIK CUCM doesn't have a ssh client.
If you are on a virtual environment, you can ssh to your esxi and from there smyou can ssh your gateway.
HTH
Regards
Carlo
11-05-2015 07:53 AM
H.323 gateway is not a special device rather a standard IOS. You need to follow the same process as with any standard Cisco router.
- Vivek
11-05-2015 07:57 AM
Can you give me the the cammand line that I should enter in CUCM (in CLI) to establish ssh/telnet
session.
Thanks, Vivek, fro the feedback
11-05-2015 08:00 AM
Why do you want to login from CUCM CLI?
Simply use PUTTY/Telnet and login to router. Isn't it?
- Vivek
11-05-2015 08:05 AM
It's not that simple, my pc can't ping the gateway, but I can ping the gateway from the CUCM CLI interface
that's why I'm asking if there is way to establish a telnet/ssh session from the CUCM into the gateway.
11-05-2015 11:56 AM
Hi.
AFAIK CUCM doesn't have a ssh client.
If you are on a virtual environment, you can ssh to your esxi and from there smyou can ssh your gateway.
HTH
Regards
Carlo
11-08-2015 12:02 PM
Thank you, Carlo, for your confirmation
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: