How to know the version of Skinny use on CCM 6.1.2

[qpippen]

Hello all,

Is there a way to know which version of the protocol skinny is use on my CUCM 6.1.2 system ?

Or I can just assume that it's the latest ?

[Rob Huffman]

Hi there,

It's likely not the latest which is SCCP version17 I believe. Version 17 was not integrated

with CUCM until CUCM 7.x. Have a look at this excellent doc from Wes Sisk @ Cisco;

https://supportforums.cisco.com/docs/DOC-8131;jsessionid=92A3673D1CCD27D1388811BBD2AFDBDB.node0

Cheers!

Rob

[qpippen]

Hi Rob,

thanks for the tips!

I did a packet sniffing and the sccp version in the packets were not shown... kinda strange!

I had to extract the information via the Hex dump!

well