good day to all engineers!
I have a polycom phone which another PBX ( Siemens) could do first conference marking the extention and then pressing the flash key and typed the extention * 3 copn this procedure to the conference .
We migrated the analog telephony with new VG350 , I found in internet commands to schedule conferences in VG350 , but I can not make the conference I can only transfer to other extensions , any suggestions on this?
these are the commands to enable itilice :
VG_AGS1_11 (config ) # stcapp call- monitoring mode feature
VG_AGS1_11 (config- stcapp - FMCODE ) # * 3 conference
VG_AGS1_11 (config- stcapp - FMCODE ) # end
VG_AGS1_11 feature code # sh stcapp
stcapp feature access- code
malicious call ID ( MCID ) ***
prefix **
call forward all ** 1
call forward cancel ** 2
Local pickup group ** 3
pickup different group ** 4
meetme -conference ** 5
pickup direct ** 6
forward- to- voicemail ** 7
cancel call waiting ** 8
stcapp speed- dial feature disabled
stcapp call- monitoring mode is mode feature
# 1 - hangup last active call
# 2 - transfer
* 3 - conference
# 4 - drop last conferee
# 5 - toggle Between Two calls
I hope you do understand me, thanks!
Greetings!
I hope you do understand me, thanks!
Greetings!
good day to all engineers!
I have a polycom phone which another PBX ( Siemens) could do first conference marking the extention and then pressing the flash key and typed the extention * 3 copn this procedure to the conference .
We migrated the analog telephony with new VG350 , I found in internet commands to schedule conferences in VG350 , but I can not make the conference I can only transfer to other extensions , any suggestions on this?
these are the commands to enable itilice :
VG_AGS1_11 (config ) # stcapp call- monitoring mode feature
VG_AGS1_11 (config- stcapp - FMCODE ) # * 3 conference
VG_AGS1_11 (config- stcapp - FMCODE ) # end
VG_AGS1_11 feature code # sh stcapp feature code
stcapp feature access- code
malicious call ID ( MCID ) ***
prefix **
call forward all ** 1
call forward cancel ** 2
Local pickup group ** 3
pickup different group ** 4
meetme -conference ** 5
pickup direct ** 6
forward- to- voicemail ** 7
cancel call waiting ** 8
stcapp speed- dial feature disabled
stcapp call- monitoring mode is mode feature
# 1 - hangup last active call
# 2 - transfer
* 3 - conference
# 4 - drop last conferee
# 5 - toggle Between Two calls
I hope you do understand me, thanks!
Greetings!
I hope you do understand me, thanks!
Greetings!
