How to test V WIC2-2MFT-E1 without PSTN line ?

[wahidayat007]

Is there any method that I installed V WIC2-2MFT-E1 on 2801 router and test, whether ports are working ?

Any help will be appreciated.

Thanks

[Michael Owuor]

Hi,

You could use a T1 crossover cable to connect one port to the other (or back to back to another router), and configure the PRIs with one side emulating the network side and the other the user side, and then send a call through.

Regards,

Michael.

[wahidayat007]

Do you mean,

cross/cable

IP-phone--CM---2801<----------->2811

Do you mean like that or if can give me simple senario

thanks

[Michael Owuor]

An example of simple scenario:

IP-Phone--CME--2801<--->2811--CME--IP-Phone

Make one side user and other network as described here:

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dt_q931.html

Regards,

Michael.

[wahidayat007]

Thanks Micheal.