hello
i need your help to test the fax over ip
s started with T37 FOIP in my lab ,i used a router cisco 2801.
So I configure my router using onramp and offramp script .
in the test
from the fax machine to email work fine without a problem
the problem if i send an email from Outlook to fax machine i get this erreur
**********************************************************
Delivery was unsuccessful to the following recipient(s):
<fax=71891226@fax.xxxxx>
Failed with the status of: 450 4.4.2 Modem timed out
The cause code is: no user answer (19)
The fax error text is: no user answer (19): No answer T30 timeout
***********************************************************
i test every think but dosen't work.
this is my router config
**********************************************************************************************
fax#sh run
Building configuration...
Current configuration : 2844 bytes
!
! Last configuration change at 11:09:27 GMT Mon Nov 29 2010
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname fax
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$FW2N$M3Dd8klY1SefZSa6XCTsa.
enable password gss
!
no aaa new-model
!
clock timezone GMT 1
dot11 syslog
ip source-route
!
!
!
!
ip cef
ip domain name xxxxx
ip name-server 192.168.1.100
no ipv6 cef
!
multilink bundle-name authenticated
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
!
!
voice-card 0
!
fax send transmitting-subscriber $s$
fax send left-header $t$
fax send center-header $s$
fax send right-header $p$
fax send coverpage enable
fax send coverpage show-detail
fax send coverpage comment vdtl-5350-8a Offramp Cover Page
fax interface-type fax-mail
mta send server 192.168.1.104 port 25
mta send origin-prefix "Cisco-powered Fax System"
mta send postmaster borhen.bouallagui@xxxxx
mta send mail-from hostname xxxxx
mta send mail-from username Administrateur
mta receive aliases 192.168.1.104
mta receive aliases fax.gss.local
mta receive maximum-recipients 100
!
application
service onramp flash:app_faxmail_onramp.2.0.1.3.tcl
!
service offramp flash:app_faxmail_offramp.2.0.1.1.tcl
!
!
!
!
!
!
call-history-mib retain-timer 500
call-history-mib max-size 500
license udi pid CISCO2801 sn FCZ1410C1A8
!
redundancy
!
!
interface FastEthernet0/0
ip address 192.168.1.251 255.255.255.0
speed auto
full-duplex
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip default-gateway 192.168.1.1
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip pim bidir-enable
ip route 0.0.0.0 0.0.0.0 192.168.1.1
!
dialer-list 1 protocol ip permit
!
!
!
!
!
!
control-plane
!
bridge 1 protocol dec
!
voice-port 0/3/0
!
voice-port 0/3/1
connection plar 71891326
!
voice-port 0/3/2
!
voice-port 0/3/3
!
!
!
!
dial-peer voice 71 mmoip
service fax_on_vfc_onramp_app out-bound
destination-pattern 71891326
information-type fax
session target mailto:borhen.bouallagui@xxxxx
incoming called-number 71891326
mdn
dsn success
dsn failure
!
dial-peer voice 72 pots
service onramp
incoming called-number 7.......
direct-inward-dial
port 0/3/1
!
dial-peer voice 73 pots
destination-pattern .T
direct-inward-dial
port 0/3/1
forward-digits all
!
dial-peer voice 774 mmoip
service offramp
information-type fax
incoming called-number .T
image encoding MH
image resolution standard
mdn
!
!
gateway
timer receive-rtp 2100
!
!
!
telephony-service
max-conferences 4 gain -6
transfer-system full-consult
!
!
line con 0
line aux 0
line vty 0 4
password gss
login
transport input all
!
scheduler allocate 20000 1000
end!
and this sh ver output
fax#sh ver
Cisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 15.1(1)T, R ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Mar-10 02:02 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
fax uptime is 54 minutes
System returned to ROM by power-on
System image file is "flash:c2801-advipservicesk9-mz.151-1.T.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2801 (revision 7.0) with 359424K/33792K bytes of memory.
Processor board ID FCZ1410C1A8
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
1 DSP, 16 Voice resources
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
126000K bytes of ATA CompactFlash (Read/Write)
pls i need your help to do this .
thx
