Implementing CUBE on non edge router

[actualabhishek]

Hi,

I am planning to implement CUBE on CME voice gateway and this gateway is the non edge device in our network with 2 gig Ethernet connection to access switch and Core switch.

Any traffic to internet will flow from CME gateway (CUBE)--->Core Switch---->WAN Internet Router---->Level 3 MPLS cloud (Internet)

Is it possible to configure CME as a CUBE without having any direct link to internet, so that we can route calls to SIP ITSP?

Thanks!!

[Vivek Batra · Accepted solution]

I don't see any issue in this as long as CUBE has a connectivity to ITSP either direct or indirect.

- Vivek

[Mohammed al Baqari · Accepted solution]

Hi,

It is possible. All you need is an IP connectivity between ITSP and CUBE. However, this isn't the best practice. CUBE usually should be at the edge of the network