in Cisco IP Phone web page, why there is no date on "debug display" under "Device Logs"?

[Oak Ridge]

    12:32:58p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    12:34:00p 14: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=UCM-closed-TCP
    2:31:29p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    6:04:11p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
    1:16:27a 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    1:16:30a 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
    1:16:31a 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
    8:30:22a 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    8:30:26a 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
    8:30:26a 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
    9:33:40p 22: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Reset
    1:59:53a 25: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Initialized
    10:39:16p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    10:46:38p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    10:46:45p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
    1:37:51p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
    1:37:59p 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
    1:37:59p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart

see the above example. No way to identify which day it happened.

[Manish Gogna]

Hi Oak,

This is working as designed. I check in my lab setup on a couple of different cucm versions, the date is not displayed in these logs.

Manish

- Do rate helpful posts -