05-24-2007 08:39 AM - edited 03-14-2019 09:41 PM
Has anyone ever had to try and block calls from one specific outside caller with one specific ANI to one internal user?
05-24-2007 10:29 AM
If you're using H.323 on the gateway, one way to do this is with a voice translation rule. You can use the "reject" keyword when creating the rule. Take a look at the following link.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Hope this helps. If so, please rate the post.
Brandon
05-24-2007 11:03 AM
Hi !
Thanks for the response! No, all I have to work with is ccm 4.1(3) and mgcp gateways on both 6608's and cmm mods. :(
Matt
05-24-2007 11:08 AM
Matt,
There's no way to do this with MGCP that I'm aware of.
Brandon
05-24-2007 11:22 AM
hi!
you know, i read this document and it looks like the only way to reject calls is based on the dialed number. I want to know if there is anyway to block calls from a specific number... ???
thanks,
matt
05-24-2007 11:26 AM
Yes, in the translation profile, you can use "translate calling" along with the "reject" keyword in the rule to block callling numbers.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide