02-23-2009 04:16 PM - edited 03-15-2019 04:24 PM
When calls come in on our Cisco system, they show up as a 10 digit caller id number. If the user goes into their Call Directory (ie Missed or Received Calls), it shows as being the 10-digit number. The problem is that if they then try to Dial that number (not using EditDial), the call doesn't go through. I tried either a Route Pattern or a Translation Pattern, but it causes the phones to wait for the Interdigit Timeout before dialing internal extensions. Is there is a way to automatically either prefix the 91 to the 10-digit number, or change the incoming caller id to include the 91, without causing the timeout problem (or is there some other recommended way of handling this)?
Thanks for any help.
Solved! Go to Solution.
02-23-2009 04:19 PM
Add Prefix to the Missed Call Number
please try searching previous post as this has been asked many time before
HTH
java
if this helps, please rate
02-23-2009 04:19 PM
Add Prefix to the Missed Call Number
please try searching previous post as this has been asked many time before
HTH
java
if this helps, please rate
02-23-2009 04:20 PM
I did try searching, but the search terms I tried didn't find any appropriate results. Thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide