cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
581
Views
0
Helpful
3
Replies

Increase the VM time

Rachna Sharma
Level 1
Level 1

Hi Guys,

Is there any way to increase the VM recording time upto 2 minutes.

Currently, the CME is not taking message more than 60 sec.

Regards,

Rachna

1 Accepted Solution

Accepted Solutions

Gajanan Pande
Cisco Employee
Cisco Employee

As you are using CME, I presume the VM system is CUE. Following commands should help you. Default recording time is 900 seconds or 15 mins.

voicemail recording time seconds

no voicemail recording time

Refer http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/Command/v_cmds.html#wp1017265

Pls rate helpful posts.

GP.

View solution in original post

3 Replies 3

Gajanan Pande
Cisco Employee
Cisco Employee

As you are using CME, I presume the VM system is CUE. Following commands should help you. Default recording time is 900 seconds or 15 mins.

voicemail recording time seconds

no voicemail recording time

Refer http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/Command/v_cmds.html#wp1017265

Pls rate helpful posts.

GP.

Hi Gajanan,

Thanks. It helped and also resolves the issue with the disengage tone after the VM message.

Regards

Glad, I could assist.

GP.