Initiating MeetMe conference calls from analog Polycom phones
We would like to be able to initiate MeetMe conferences from our analog Polycom phones. Our vendor has suggested that we configure the stcapp feature access-code on our analog gateways. This change would allow us to dial **5 to initiate a MeetMe conference from an analog phone. Before approving this change, I would like feedback from any users currently using this FAC method. Does it work well? What might this change break? What should we test after the change. I would also like feedback from Cisco employees who are familiar with this workaround. I did find one post that spoke to this specific change (subject was Feature Access Code: Meet Me Conferencing and was very imformative), but I'm digging for a little more information. We currently have Call Manager 7.13 with VG224 and VG204 analog gateways. Thanks!!
Check out this adoption toolkit for Cisco Webex Meetings. Start having workflow-based conversations with executives and executive admins.
This package includes links to collateral such as step-by-step discovery instructions, a communications plan templat...
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...