02-12-2016 06:58 AM - edited 03-17-2019 05:52 AM
Hello,
Has anybody ever integrated a Mobotix M24 camera into a CUCM 10.5.2?
I have Mobotix Cameras and I want to use event triggers of the camera to dial a number on IP phone to alarm me when a trigger is initiated. Please correct me if I'm wrong, on CUCM side it should be added as a third party SIP device and on Cameras side as SIP Client.
Any help will be appreciated.
Thank You,
Solved! Go to Solution.
02-12-2016 09:25 AM
Hi,
I don't know about mobotix camera but if it's normal SIP device then what you are saying is right. You need to add it as third party SIP device. I hope you are aware about required configuration to be done, otherwise let us know.
- Vivek
02-12-2016 09:25 AM
Hi,
I don't know about mobotix camera but if it's normal SIP device then what you are saying is right. You need to add it as third party SIP device. I hope you are aware about required configuration to be done, otherwise let us know.
- Vivek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide