01-30-2012 03:20 AM - edited 03-16-2019 09:17 AM
Hi Everyone,
I'm Serge and i have a problem with two of muy customers' phones (7911).
The phones have been hard reset with the code: 123456789*0#
After restart, they remain blank (No Cisco Logo is apprearing and nothing at all) see Pics below.
They are just blank (ROM is empty).
Please can any of you help me get these phones working? I'm using Cisco UC500 with CUCME Version=8.1.
Thanks for your help!
Sergent_02
01-30-2012 03:22 AM
And this process on the pics, keep on repeating let say every 2 to 3 mns.
Need some help please.
Sergent_02
02-01-2012 07:11 AM
Please i need help here, guys!
Thanks,
Sergent_02
02-01-2012 07:15 AM
Hi,
Have a read at this link.
http://blog.qsolved.com/2010/09/cisco-7911g-not-booting.html
HTH
Alex
06-04-2020 01:59 PM
J’ai le mémé problème avec mon ip phone 7911 LED ROUGE et l'autre VERT sans qu'il démarre je pense que c'est une panne HARD d'un composant électronique que je n'arrive pas à l'ou trouvé
06-05-2020 02:04 PM
j'ai le même problème et d’après le diagnostic que j'ai fait je pense que c'est un problème HARDWARE un composant électronique qui a céder mais j'arrive pas encore a localisé je cherche toujours les documentations
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide