Hey guys! I need your help!
We have three 7962 IP Phones with 7915 Expansion Modules Attached. They are configured registered in a CME 10.0.
The issue is: BLF on 7915 is not working well. They are not signalling when a Line is busy (red light). It already worked before.
I'm following the guide below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html
I'll attach the "Show Telephony Service" and an Ephone Configuration.
Please, let me know if you have any idea about waht is going on.
Thanks,
Marcos Lopes
