IP to IP GW calls - Transfer issues

[Jefferson Islan Silva]

I`m doing a IP to IP call via CUBE,

the  ip to ip calls are working properly, but when I place a IP to IP I cannot transfer the call to another destination.

01:21:24.477 |StationCdpc - ERROR  active10: hold rejection|5,200,16,1.498662^10.21.18.7^ELDOR_4711

01:21:43.512  |Transferring - handleTransferErrorPreStart, ERROR fid=[140], Retaining  Calls, xferring[5, 98279219], xferred[5, 98279217]. infoCause=63,  clearCause=0|5,200,16,1.498667^10.21.18.7^ELDOR_4711

01:21:55.522 |MediaManager(35202)::wait_AuConnectErrorInd, mCleanupPreallocatedMTP=0|5,200,16,1.498669^10.21.18.7^ELDOR_4711

And after this the h.323 leg, drop the call.

Working call flow:

SPO PHONE -> SPO CUCM -> SPO H.323 GW -> VPN SITE TO SITE -> COMPANY H.323 GW ->

COMPANY CUCM ->  COMPANY PHONE

Non working call flow:

SPO PHONE -> SPO CUCM -> SPO H.323 GW -> VPN SITE TO SITE -> COMPANY H.323 GW ->

COMPANY CUCM ->  COMPANY PHONE -> TRANSFER TO ANOTHER COMPANY PHONE

[chrysostomos1980]

Hi

Are you using g711 or g729 for calls to the other branch throught vpn

[Jefferson Islan Silva]

IP 2 IP calls are going through G.729

[chrysostomos1980]

So you need a transoding in the remode branch

Did you create?

I belive this is the issue

Calls to remote branch using g729 / When you transfer the call to internal number its using g711

So transoding will solve your issues